Industrial Bolts

As it is clear from the name, these Bolts are used to climb up the Towers and give support to the foot. These are used in all types of Tower Structures. The same are manufactured as per following parameters :

Standards : IS 10238
Material    : Carbon Steel
Grade       : 4.6 / 5
Finish       : Hot Dip Galvanized
Sizes        : M16 and M20 Diameter
                 150MM to 300MM Long

Rail Guard Bolts or Crash Barrier Bolts are mainly used in the installation of Road Crash Barriers on the Road Sides and Turning Points of Roads for the Safety of Vehicles. We manufacture these Bolts as

Standard  : DIN, ISO, BS
Material   : Carbon Steel & Boron Steel
Surface    : HDG, Zinc Plated, Self & Black
Grades    : 4.6, 4.8, 5.6, 5.8, 8.8
Sizes       : M12 to M20 Diameter
                25MM to 100MM Long

To safe-guard the Bolts and Nuts from theft, these specially designed Bolts and Nuts are used in Power Transmission Towers, Tele-com Towers, Wind Mills and other Structures installed in remote areas. Once fixed, the Nuts are tightened to the maximum Torque, untill the head of the Nuts breaks. Then it cannot be opened with any Wrench or Spanner.
We manufacture this item as per following parameters :

Standard : DIN, ANSI,ISO, JIS
Material   : Carbon Steel
Sizes       : M12 to M20 Diameter
                 30MM to 150MM Long
Grade     : 4.6, 5.6 5.8, 6.8
Finish      : Hot Dip Galvanized,Self

These High Tensile Bolts are manufactured as per following parameters :

Standard   : BS-7419
Material    : Carbon Steel & Boron Steel
Grade       : 8.8
Sizes        : M16 to M36 Diameter
                 30MM to 300MM Long
Finish        : Hot Dip Galv; Zinc Plated, Self, Black 

We produce various types of Hex Bolts as per following parameters :

Standards : Hex Head Bolts Half Thread
                 DIN-931 / ISO-4014 / EN-24014,  
                 ISO-4016, IS : 1363, IS : 12427,
                 BS-4190
                 Hex Head Screw Full Thread
                 DIN-933/IS:1363, 1364/ISO-4017,
                 4018, BS-4190 / AS-1111/ BS-3692
Sizes        : M8 to M64, Length upto 400MM
Grades     : 4.6, 5.6, 5.8, 6.8, 8.8, 10.9, 12.9
Material    : Carbon Steel, Boron Steel, Allot Steel
Surface     : HDG, Zinc Plated, Self, Black

We offer precision engineered range of U bolts which are manufactured keeping in mind the intricate details as under :

Standard : DIN-3570 
Sizes      : Customized
Material  : Carbon Steel, Boron Steel
Grades   : 4.6, 5.6, 8.8
Surface   : HDG, Zinc Plated, Self, Black

We specialize in this item and manufacture as per following parameters ;

Standards : DIN-603/IS:2609/BS-4933/AS-1390
                 /ISO-8677
Sizes        : M6 to M20, Length upto 400MM
Grades     : 4.6, 4.8,  5.6, 5.8, 8.8, 10.9
Material    : Carbon Steel, Boron Steel & Alloy Steel
Surface     : HDG, Zinc Plated, Self, Black

There are so many applications of this item in Industrial and General Sector. These are manufactured as per :

Standard : DIN-478 to 480, ASTM
Sizes      : M6 to M30, Length upto 1000MM
Material  : Carbon Steel, Boron Steel & Alloy Steel.
Grades   : 4.6, 4.8, 5.6, 5.8, 8.8, 10.9
Surface   : HDG, Zinc Plated, Self, Black

This Hex Head Bolt with Flange can be used without Washers, as the Flange portion serves the purpose of Washer for better Tightening. These Bolts and Nutrs are manufactured as per following parameters :

Standard  : DIN-6921 / EN-1665 for Flange Bolts
                
Sizes       : M6 to M30, Length upto 400MM
Material   : Carbon Steel,Boron Steel
Grades     : 4.6,4.8,5.6,8.8
Surface    : HDG, Zinc Plated, Self, Black